IMPORTANT: Shake bottle before use. Do not use conventional detergents. Always clean first with Nikwax® Tech Wash® in a separate wash cycle. Do not dry before waterproofing.

1. Remove all detergent build-up from the detergent dispenser.
2. Place a maximum of 2 clean garments in washing machine.
3. Add 100ml of TX.Direct® per garment.
4. Run a 30°C synthetic cycle on a slow spin.

Drying: Air dry or tumble dry on a low setting if care label allows.

To maintain waterproofing always wash with Nikwax Tech Wash®. Do not use detergents.

Nikwax TX.Direct® Wash-In can be applied by hand…

IMPORTANT: Use gloves

1. Immerse 1 clean garment in 7.5L of hand hot water, in a bowl or sink.
2. Add 100ml of TX.Direct®.
3. Agitate to mix, leave to soak for 5 minutes, then agitate thoroughly.
4. Rinse with cold water until water runs clear.

Drying: Air dry or tumble dry on a low setting if care label allows.